How To Repair Hose Reels?
Hose reel can be found easily in almost any home as this helps in keeping garden hoses clean and neat. But sometimes, it gets damaged or punctured because of some reasons. You may either buy a replacement of its essential parts or, do repairs at home which can help in saving money through the process.
No matter what category of hose reel you have bought, there’s a chance that it’ll start to leak through its joining points or, it may be punctured. As a matter of fact, repairing the leaks of hose reel is not that hard since you can do the repair of hose reel cart, retractable hose reel or even the wall mounted units on your own by following the tips below.
Tip number 1. Check all connections – hose reels generally have at least 5 different connectors that are located on leader hose, beginning of the faucet, garden hose, out tube and in tube. You must try tightening every connection before opting out for an expensive replacement or repairs if your hose has leak. It is because of the reason that at times, loose connector is what causing the problem. While you are repairing the connectors, you should be certain to line up the threads to be able to avoid any damage to it.
Discovering The Truth About Resources
Tip number 2. Change defective O-rings – in different types of reels, this is actually one of the common repair steps needed to be done. The reels at times got leak because the o-rings get cracked or dry after using for a long time. You can buy replacement for it easily from almost any hardware store or through the internet. On the other hand, for you to confirm which size of o-ring is recommended for that model you have at home, it will be wise for you to take a look at the website of the manufacturer or the guidebook before buying one.
Lessons Learned from Years with Gardening
Tip number 3. Take out the panel – detach the hose as well as the reel by the time you have turned off the water supply to the hose reel. Then after, you need to use a screwdriver to be able to take out 4 bolts which are located on the knob side of case and put them in a secure place. To uncover the entire panel, pull away the shield from the case when you are done.
These are only 3 simple tips that can be a big help when you are doing a DIY repair on your hose reel. Now in case that the problem still exists, that may be the time to buy a new one.